Blue Seal G592 Specifications download pdf (Page 10)

Installation

Clearances

NOTE: Only non-combustible materials can be used in close proximity to this appliance.

Assembly

Bench Models (G592 Model Only)

1. Check all feet are securely fitted.

Bench Models (G594 / G596 / G598 Models Only)

1. Check all feet are securely fitted.

2. Adjust feet to make Chargrill steady and level.

Mounting the Chargrill direct onto Bench / Worktop (Non-Combustible materials Only)

NOTE:

 Ensure that bench / worktop has been suitably modified to accept gas connection at

rear of chargrill.

 Ensure that bench top surface is made of a non-combustible material.

a. Remove grates, griddle plates and radians from

chargrill.

b. Lower chargrill onto it’s rear face.

c. Remove legs and leg plates from underside of

chargrill.

d. Lift chargrill back into upright position and

place onto bench / worktop.

e. Refit all grates, griddle plates and radians to

chargrill, ensuring that they are correctly fitted.

Leg Stand Models Only

 Leg Stand Models will require assembly. Refer to 'Fitting of Adjustable Feet / Rollers

to Leg Stand Units' information below for assembly instructions.

 The rear leg housings can be fitted with:-

a. Adjustable feet to assist with levelling of appliance on uneven floors.

b. Rear rollers to enable appliance to be easily moved for positioning and cleaning

purposes.

c. Front and rear leg mounting points can be removed for fitting direct onto a

bench top work surface etc without legs fitted.

Optional Accessories (Refer to Replacement Parts List)

 Plinth Kit. For installation details, refer to instructions supplied with each kit.

Combustible Surface Non Combustible Surface

Left / Right Hand Side 200mm 0mm

Rear 150mm 0mm

Chargrill

Leg

Leg Plate

Fig 1

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

No comments

Blue Seal G592 Specifications Page 10